|
 High Efficiency, Low Speed Centrifuge
The Line Backer tm
Centrifuge is a low speed (700
rpm) triple-bowl design. Due to
its advanced engineering it
achieves the same performance as
a high-speed centrifuge.
The Line Backer tm
Centrifuge comes in Double-bowl
or Triple-bowl design. The
Double-bowl centrifuge has a
maximum flow rate of 15 GPM and
the Triple-Bowl has a maximum
flow rate of 30 GPM. Your
application requires more than
30 GPM, No problem; by combining
centrifuges together we can meet
your application requirements
affordably.
The Double-Bowl or Triple-Bowl
centrifuge can be purchased as a
single unit or combined with a
solids pickup system, clean
fluid holding tank, and clean
fluid supply pump to work off of
an existing sump or replace the
sump.
|
 |
The CMS-15 is a 15 GPM
rated centrifuge with a
base. This unit is used
on the outside of a tank
and requires a supply
pump which can be
provided by EdjeTech or
the client.
The contaminated fluid
is discharged from the
supply pump into the
centrifuge where the
solids are removed by
the spinning bowls. The
solids are pushed
against the side of the
bowls and the fluid
flows up and over the
bowls and drains out the
side of the CMS-15. |
 |
|
Benefits |
Applications |
Features |
|
Extended coolant life |
Centerless grinding |
Trouble-free operation |
|
Improved surface finish |
Form and thread grinding |
Low speed operation
reduces vibration and
wear |
|
Longer tool life |
Thread rolling |
No replacement
cartridges or roll media |
|
Less machine down time |
Glass grinding |
Up to 3 times the solids
capacity compared
to single bowl
centrifuges |
|
Increased production |
Honing |
Bowl cleaning
unnecessary between
startups |
|
One person servicing
without tools |
Quench oils |
Reduced service
requirements |
|
|
Vibratory finishing |
|
|
