|
Aeroex Oil Mist Eliminators
Aeroex systems efficiently and cost effectively
solves environmental problems associated with
oil mist emissions in the metalworking industry,
as well as other applications where aerosols
must be captured. The units feature a unique
patented mechanical pre-separation and a
permanent self-draining media that maintains
constant high separation efficiency. There are
no consumables and maintenance is
minimal to none.
What does the oil mist separator remove?
Aerosols ~Liquids ~ Oils ~ Water ~ Emulsions
The Aeroex axial oil separation product line
features a unique patented mechanical
pre-separation and permanent self-draining
media, called agglomerator that maintains
constant high separation efficiency.
The first stage of mechanical separation,
coaxial tubes forming 3 stages of separation,
separates 75-85% of the oil mist, particles
above 1 micron. The agglomerator media captures
the smaller oil droplets down to 0.5 microns,
producing a total system efficiency of up to
98%. The oil droplet agglomerator functions best
once wet oil, using the oil bath principle, fine
droplets are absorbed into the oil in the media.
The Aeroex axial mist separator is one of few
that is truly self-draining, designed for 24/7
operation. The cylinder design creates a high
media surface area to air flow ratio thus a low
air velocity preventing mist to be carried off
the media. The oil drains down vertical and not
into the airflow like many flat media filters.
|
Features
-
Separation efficiency up to
99.9% @ 0.3 microns
-
Over 90% of oil is separated,
not filtered
-
Exceptional oil drainage
-
Low oil evaporation & odors
-
High solids tolerance
-
Permanent self-draining 2nd
stage filter
-
No separation deterioration over
time.
-
Removes smoke (optional
polishing filter)
-
24/7 operation - no down time.
-
Optional Clean-In-Place (CIP)
system
Benefits
-
Low mainenance
-
Healthier & safer work
environment
-
Low oil vapors to condense on
cold surfaces
-
Reduced maintenance to HVAC
equipment
|
 |
| |
|
|
Oil Mist Collector Principle
(Literature,
How to size a unit)
The product line features unique
mechanical pre-separation elements
and permanent self-draining depth
fiber filter called agglomerator
which maintains a constant high
separation efficiency.
The first stage mechanical elements
separates over 90% of the mist and
provides exceptional gravity
drainage. The bulk of the oil is
quickly removed out of the air flow,
reducing oil evaporation and odors
(oil captured in filters will
evaporate over time). The
mechanical elements has a high
tolerance for solids and eliminates
most solids from the air stream.
The 2nd stage agglomerator filter
captures oil droplets down to
0.3-0.5 microns, with a system
efficiency up to 99%. Optional 3rd
stage polishing filter captures oil
smoke, 95% @ 0.3 microns or 99.99%
HEPA. There is also an optional
Clean-In-Place (CIP) system for
flushing the 2nd stage agglomerator
filter for maintenance free
operation.
Aeroex Oil Mist Collectors
Technical Data
|
Model |
CFM |
HP |
Diameter |
Height |
Weight |
Duct Connection |
|
REX-500 |
500 |
0.5 |
22" |
29" |
160 lbs. |
5" |
|
REX-700 |
700 |
1.0 |
25" |
35" |
210 lbs. |
6" |
|
REX-1100 |
1100 |
3.0 |
30" |
38" |
300 lbs. |
7" |
|
REX-1800 |
1800 |
5.0 |
33" |
48" |
360 lbs. |
8" |
|
|
Unit Flow |
|
REX Elements |
|
Clean-In-Place System |
|
For more information contact
EdjeTech Services |
